Deep waste burial a better solution than the much touted PRISM and MOX

Another option on the table is PRISM. Developed by GE Hitachi (GEH), PRISM is a sodium-cooled fast reactor that uses a metallic fuel alloy of zirconium, uranium, and plutonium. GEH claims PRISM would reduce the plutonium stockpile quicker than MOX and be the most efficient solution for the UK. The problem is, despite being based on established technology, a PRISM reactor has yet to be built, and the UK is understandably a little reluctant to commit in this direction. Seen as something of a gamble, it remains in the running alongside the currently more favoured MOX option.

Amid all the uncertainty, one thing is for sure. Regardless of what decision is taken, a proportion of the plutonium will end up as waste and will need to be safely disposed of.

Unlike MOX and PRISM, immobilisation has no prominent industry backers. In comparison to exploiting the plutonium for our energy needs, there is no great fortune to be made from disposing of it safely. But immobilising the entire plutonium stockpile may in fact be a more economically sound approach than reprocessing

Sellafield plutonium a multi-layered problem, The Engineer UK,   6 November 2015 | By Andrew Wade   “……..It takes somewhere in the region of 5-10kg of plutonium to make a nuclear weapon, so 140 tons is a slightly worrying amount to have sitting in a concrete shed in Cumbria. While everyone at the press conference was at pains to point out that there are no major safety concerns with the current storage, it is widely accepted that a long-term plan needs to be formulated. This, however, is where things get tricky. The potential energy of the plutonium if converted to nuclear fuel is massive, but there are several competing technologies vying for endorsement, none of which are well proven as financially viable.

Top of the list – and the government’s current preference – is for some application that uses mixed oxide fuel, or MOX. MOX is made by blending plutonium with natural or depleted uranium to create a fuel that is similar, but not identical, to the low-enriched uranium used in most nuclear plants today. MOX can be – and in several European countries is – used in thermal reactors alongside uranium. But despite past concerns, there is in reality no shortage of uranium today, so no huge need to supplement it with MOX in current reactors. Where MOX could in fact lead to greater efficiencies is in fast reactors, but these are costly and difficult to operate, and would not make economic sense unless the cost of uranium fell.

To complicate matters further, developing MOX is by no means a straightforward process. A Sellafield MOX Plant was completed in 1997, didn’t actually begin operation until 2001, and was closed in 2011 after a poor performance record that saw it deliver just 5 tons of MOX in its first five years. To put that it into context, it was designed with a capacity for 120 tons a year. Total construction and operating cost was around £1.2bn. While France has had a degree of success in producing MOX, construction on the US’s MOX production facility at the Savannah River Site was recently pushed back a decade, and may not be in operation until 2033.

Another option on the table is PRISM. Developed by GE Hitachi (GEH), PRISM is a sodium-cooled fast reactor that uses a metallic fuel alloy of zirconium, uranium, and plutonium. GEH claims PRISM would reduce the plutonium stockpile quicker than MOX and be the most efficient solution for the UK. The problem is, despite being based on established technology, a PRISM reactor has yet to be built, and the UK is understandably a little reluctant to commit in this direction. Seen as something of a gamble, it remains in the running alongside the currently more favoured MOX option.

Amid all the uncertainty, one thing is for sure. Regardless of what decision is taken, a proportion of the plutonium will end up as waste and will need to be safely disposed of. One of the speakers at the press conference was Professor Neil Hyatt from the University of Sheffield. A materials science specialist, Hyatt is currently developing an immobilisation technique that can be used to render the plutonium unsuitable for weaponisation, allowing it to be more safely stored in the longer term. Using a form of hot isostatic pressing (HIP), the process mimics the formation of ancient minerals by using extreme heat and pressure to lock the plutonium inside ceramic based wasteforms.

According to Hyatt, the HIP technology is about a decade away from operation. Unlike MOX and PRISM, immobilisation has no prominent industry backers. In comparison to exploiting the plutonium for our energy needs, there is no great fortune to be made from disposing of it safely. But immobilising the entire plutonium stockpile may in fact be a more economically sound approach than reprocessing, says Hyatt. Some see this as madness, putting all that potential energy beyond the use of future generations. Others believe the technology needed to exploit that energy is decades away, by which point fusion and renewables will be better options. Just about the only thing the NDA could say with certainty, was that the right decision is more important than a quick one. We wait with bated breath.  http://www.theengineer.co.uk/blog/sellafield-plutonium-a-multi-layered-problem/1021371.article 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: