Nuclear fusion reactor launched in Germany

Germany launches world’s largest nuclear fusion reactor  The rocky road to nuclear fusion power, DW, 18 Dec 15   Innovative designs using modern superconductors are supposed to bring us nuclear fusion power plants soon – some optimists say. Fusion experts predict, however, that a practical application will take many more decades. Nuclear fusion is considered a potential energy source of the future. It’s clean nuclear energy. But what is it, exactly and why is it so difficult to generate? Let’s start with the difference between classical nuclear fission and nuclear fusion.

Nuclear fission means that radioactive isotopes, like uranium or plutonium are being split up and turned into other highly radioactive isotopes that then have to be deposited or reprocessed.

Nuclear fusion means that two isotopes of hydrogen – called deuterium and tritium – merge together – they “fuse.” And that leaves behind only non-poisonous helium and one single neutron, but no nuclear waste.

Huge amounts of energy caught in a plasma

Nuclear fusion takes place in the sun for example – or in a hydrogen bomb – and that’s the big challenge for engineers – how do you control the high energy fusion process in a power plant?

That’s what scientists have been working on since the 1960s. One model-fusion-reactor called Wendelstein 7-X has just started operating in the northern German town of Greifswald. It is not designed to generate a nuclear fusion reaction yet – so far it’s just a specific reactor design that’s being tested.

What all fusion reactors have in common is a ring-shaped form. The idea behind it is to take powerful electromagnets and create a strong electromagnetic field, which is shaped somewhat like an inflated bicycle tube.

That electromagnetic field must be so dense that when it is being heated by a microwave oven to about one million degrees centigrade, a plasma will emerge in the very center of the ring. And that plasma can then be ignited to start the nuclear fusion process.

Research reactors show what’s possible

In Europe, two prominent fusion experiments are under way. One is Wendelstein 7-X, which just generated its first helium plasma last week – albeit without actually going into nuclear fusion. The other one is ITER – a huge experimental project in southern France, which is still under construction and won’t be ready to run before 2023.

ITER is supposed to do real nuclear fusion – but only for short periods of time, certainly not for any longer than 60 minutes. And ITER is just one of many steps towards turning the idea of nuclear fusion into a practical application.

Are smaller, alternative designs feasible?………

Hot, hot, hot

The heat is also problematic. In the core of the nuclear-fusion plasma, the temperature would be around 150 million centigrade. This extreme heat stays put – right there in the center of the plasma. But even around it, it still gets seriously hot – 500 to 700 degrees at the breeding blanket – which is the inner layer of the metal tube that contains the plasma and which will serve to “breed” the tritium that is needed for the fusion reaction.

Even more problematic is the so called “power-exhaust.” That is the part of the system, where the used-up fuel from the fusion process is being extracted – mostly helium. The first metal components hit by hot gases are called the “diverter.” It can get hotter than 2,000 degrees centigrade.

The engineers are trying to use the metal tungsten, used in old-fashioned light bulbs – to withstand such temperatures. They have a melting point of around 3,000 degrees. But there are limits.

“In the case of ITER we can do it, because the heat is not there constantly. Only one to three percent of the time, ITER will eventually be running.” Hesch says. “But that is not an option for a power plant, which has to run 24/7. And if someone pretends to build a smaller reactor with the same power as ITER, I can definitely say – there is no solution for that diverter-problem.”

Several decades to build a real power plant

Nonetheless Hesch is optimistic that the development of nuclear fusion power reactors will go ahead – but not quite as fast as some of the industry optimists predict.

“With ITER we want to show that fusion can actually deliver more energy than we have to put into it to heat the plasma. The next step would be to build an entirely new fusion demonstrator power plant, which will actually generate electricity.”

The engineers are already working on the designs now. They will have to learn lessons from ITER, which is scheduled to start operating in 2023. Taking the necessary time for design, planning and construction into account, it looks very unlikely the first nuclear-fusion power plant will be up and running much before the middle of the century.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: